Installing your Winnow system will take between 20-45 minutes depending on the type of system you have. Before you start, make sure you’ve got all your kit on hand and the location requirements are met.
Tools Required:
Tape measure
Power drill 8mm crosshead bit
Hammer
Spirit Level
Location Requirements:
The location needs to be:
In a safe, low traffic area
convenient for kitchen staff to dispose of pre-consumer food waste stable and dry surface, space on a drillable
sturdy wall that can support 15 kg of equipment
1 dedicated plug socket
Wall height and width (1.7m x 1m)
Floor space (0.6m x 0.6m)
Distance from plug sockets (less than 1m)
Also make sure the system is away from:
Water-heavy areas
Electrical noise (big machinery eg. blast chiller, combi oven)
Air-vents, windows, or heat sources
Once all the above is clear, you may now move onto installing your system.
How to mount your tablet on the wall:
If it is a screen only, you need to:
Drill the wall mount onto the wall.
Screw the tablet onto the mount using the short screws provided.
If you have a roaming tablet:
Please keep the charging point in the main location such as an office. The mount can be used like docking station where the tablet is returned at the end of the day to recharge before your next day of operations.
Once all is done, you have completed installing your Winnow tablet